INFORMATION DETAILS
Masters Of Industrial Engineering Program

History of the MASTERS OF INDUSTRIAL ENGINEERING PROGRAM

In 1999, a preparation team for the UPN “Veteran” Yogyakarta postgraduate program opening was established, which was headed by Prof. Dr. Ir. C. Danisworo, M.Sc. After overcoming various challenges over this time, the University of Pembangunan Nasional "Veteran" Yogyakarta postgraduate program has now successfully opened various study programs.

The Masters of Industrial Engineering program obtained operating permission through, No. 2648/DT/2006, from the Director of Higher Education.

Organization

Masters of Industrial Engineering Program 

Head                                     :  Ir. M. Syahri, MT., Ph.D

Secretary                              : Ir. Dyah Rachmawati Lucitasari, MT        

Admissions                           :  Tut Wuri Handayani, S.IP

Admissions                           :  Wikan Widya Kusuma, ST.

EDUCATIONAL GOALS

To provide industrial engineering education that is oriented to the needs and developments of science in order to produce postgraduate students who have the ability to design, improve and install systems in a comprehensive manner and who are able to compete globally.

To educate and prepare students to become experts in the field of industrial engineering with an emphasis on comprehending high work productivity and optimal performance.

To pursue and produce research and development activities that will contribute to advancements in science and technology.

To conduct community service by resolving industrial problems and by being able to increase the capacity and improve the quality of education nationally.

EDUCATION STAFF

The UPN “Veteran” Yogyakarta Masters of Industrial Engineering is led by education staff with the following qualifications:

Preference is given to teaching staff that have a PhD to be responsible for each subject provided to students.

In order to further broaden students knowledge, general lectures are provided by ”Guest Lecturers” who have expertise in engineering, management and other fields of science.

LECTURES

The Masters of Industrial Engineering program consists of classical lectures, general lectures, group discussions, independent assignments and seminars. The UPN Veteran Yogyakarta Masters of Industrial Engineering program holds classes as follows :

a.) 4 days per week from 08.00 until 15.00

b.) Morning classes will be opened when there is a minimum of 10 students

MATRICULATION Program

Prospective students with a Provisional Standing status must attend the matriculation program before the first semester begins. The subjects in the matriculation program include:

a)      Introduction to Industrial Engineering                   2 semester credit units

b)      Engineering Economics                                           2 semester credit units

c)       Operational Research                                           2 semester credit units

STUDENTS

UPN ”Veteran’ Yogyakarta Masters of Industrial Engineering program  participants include university graduates (engineering, mathematics and natural sciences, economics etc) including executives, practitioners, tenured/non-tenured education staff in higher education or decision making who want to further their studies in the field of engineering and management in a more focused and in-depth manner.

SELECTION OF STUDENTS

Selection of prospective students is based on the following criteria:

  1. Has an undergraduate degree from an array of disciplines that comply with National Education Department requirements.
  2. Recommendations from two lecturers in their undergraduate program and the head of their workplace (for those who are working).
  3. Sitting the entrance tests that consist of a test on academic potential and a motivation test (interview).

ACADEMIC TITLE AND STATUS

Students who successfully complete this program are entitled to a Masters of Engineering (MT) title in accordance to provisions at the Directorate General of Higher Education, National Education Department.

CURRICULUM

To complete studies, students must take a minimum of 42 semester credit units of compulsory and elective subjects within a cumulative study time of 4 tri-mesters.

Based on: SKEP/ 94/ VI/ 2011  dated 24 June 2011 on

CODIFICATION GUIDELINES ON  DIPLOMA, DEGREE AND POSTGRADUATE PROGRAM SUBJECTS AT UPN ”VETERAN” YOGYAKARTA

 

Curriculum

Semester

Code

Subjects

SEMESTER CREDIT

Description

I

125383

Analysis of Statistics

3

MKK

125393

Operational Research

3

MPK

125403

Modeling Systems and Simulations

3

MKB

125413

Operation and Production Management

3

MKB

Sub Total

12

 

II

125423

Multi Criteria Decision making

3

MKB

125433

Managerial Accounting & Techno- Economics

3

MPB

125443

Supply Chain Management

3

MKB

125453

Research Methodology

3

MKB

Sub Total

12

 

III

125463

Assurance Systems & Quality Control

3

MPB

125473

Strategic Management

3

MPK

 

Elective 1

3

 

 

Elective 2

3

 

Sub Total

12

 

IV

125362

Seminar Proposal

2

MKB

125374

Thesis

4

MBB

Sub Total

6

 

Total

42

 

 

 

 

Semester

New Code

Elective Subjects

Semester credit units

Descripti-on

III

 

Elective

3

 

 

125483

Macro Ergonomics

 

MKB

 

125493

Oil, gas and Geothermal Industry Management

 

MPK

 

125503

Human Resource Management

 

MKB

 

125513

Care Management

 

MKB

 

125523

Non- Linear Programming

 

MKK

 

125533

Computer Based Manufacturing Systems

 

MKB

 

125543

Environmental Management Systems

 

MPK

 

125553

Sustainable Industrial Systems

 

MKB

 

Explanation:

MPK – PeRSONAL DEVELOPMENT SUBJECTS

MKK – SCIENCE and VOCATIONAL SUBJECTS

MKB – workING expertise SUBJECTS

MPB – work behavior SUBJECTS

MBB – SOCIAL LIFE SUBJECTS

FUNDING AND WORK EXPERIENCE OPPORTUNITIES

- Postgraduate students who excel and who are willing can be selected to become research assistants or laboratory assistants and receive a fee in accordance to UPNVY conditions.

- There are opportunities to obtain research funds from the Department of Education (Post grants), the Department of Research and Technology and other agencies in accordance to the proposal submission.

ProfesSiONS & EMPLOYMENT FOR GRADUATES

1.    Consultant,  doing economic analysis and institutionalizing technology, empowering communities, facilitation and community organizing as well as working as a trainer in regard to science, technology and the community.

2.    Researcher, doing economic analysis, institutionalizing technology, systems design, research on various aspects of technology, policies and their implementation.

3.    Bureaucrat, as research staff at an array of government agencies, planning and decision making in the area of technology and society.

4.    Academic, teaching related to science, systems within industries so that productivity rises adequately.

5.    Entrepreneurs, developing products and services that are greatly beneficial economically and socially; they have the ability to manage human resources and expertise in decision making and administrative management.

registration ProcedureS & location

Requirements:

A.      Undergraduate degree from any field of study

B.      Payment of Rp. 250.000 registration fee per student through BPD DIY Bank, UPNVY Cash Office Attach 2 photocopies of the undergraduate degree and academic transcript scores that have been certified by the university of origin. 3 copies of 4x6 passport photos and 2 copies of proof of payment of the registration fee.

REGISTRATION CAN BE DONE AT:

UPN ’Veteran’ Yogyakarta Postgraduate Program Secretariat

Rectorate Building, Level V, Jl. SWK No. 104 (North Ring Road) Condongcatur

Yogyakarta 55283, Telp/Fax. (0274)486367

Admissions Section at the Industrial Engineering Department in the Masters of Information Technology (MTI) Program

Pattimura Building, Level. 3 Jl. Babarsari No. 2 Tambakbayan

Yogyakarta  5528, Telp. 0274 485388 Fax. 0274 486256